Certifroid VR

VR Fluid Handling: From Proper Technique to Certification

A bench costs ≈ €5,000 for one trainee. In VR, the entire class progresses in parallel with headsets (~€300), without leaks, without consumables, without downtime.

VR certification training

Substantial savings vs traditional equipment

Risk-free learning

Arrow Right

Book a demo

Hero

CERTIFROID VR modules &
services

From individual gestures to full procedures, from preparation to certification: assemble the path you need.

Skills covered

Cat. I (recover/charge no limit), Cat. II (≤ 2 kg), Cat. III (recover no limit), Cat. IV (leak tightness check).

Skills covered

Cat. I (recover/charge no limit), Cat. II (≤ 2 kg), Cat. III (recover no limit), Cat. IV (leak tightness check).

Cat. I (recover/charge without limit), Cat. II (≤ 2 kg), Cat. III (recover without limit), Cat. IV (leak testing).

Instructor-visible micro-steps

Analog/digital manifold setup, vacuum draw (with vacuum gauge), connections (brass tees), pressure reading, recovery (frost simulation on drier & compressor bottom), reheating cold points, recovery unit purge, nitrogen pressurization, nitrogen removal, charging, manifold removal, leak checks on brazes & threaded fittings with an electronic detector, temperature/pressure/electrical measurements, service report.

Instructor-visible micro-steps

Analog/digital manifold setup, vacuum draw (with vacuum gauge), connections (brass tees), pressure reading, recovery (frost simulation on drier & compressor bottom), reheating cold points, recovery unit purge, nitrogen pressurization, nitrogen removal, charging, manifold removal, leak checks on brazes & threaded fittings with an electronic detector, temperature/pressure/electrical measurements, service report.

Pressure gauge installation (needle/electronic), vacuum pulling (vacuum gauge), connections (brass tee), pressure readings, recovery (simulated frost dehydrator & low compressor), cold point reheating, recovery station purging, nitrogen pressurization, nitrogen removal, fluid charging, pressure gauge removal, leak detection on brazing and screw connections with electronic detector, T/Pressure/Electrical measurements, intervention report.

Right to fail (safely)

Over/under-charge, opening a nitrogen bottle without a gauge (never in real life), even a 'venting' simulation (strictly forbidden in reality) to learn why it's wrong and how to avoid it.

Right to fail (safely)

Over/under-charge, opening a nitrogen bottle without a gauge (never in real life), even a 'venting' simulation (strictly forbidden in reality) to learn why it's wrong and how to avoid it.

Over/undercharge, opening a nitrogen bottle without a pressure gauge (not to be done in real life), simulated 'degassing' to understand why it's forbidden and how to avoid the error.

Simulated equipment

Virgin/recovery/transfer cylinders, electronic scale, analog & digital manifolds, vacuum gauge, vacuum pump, brass tees, recovery unit, PPE (gloves, goggles, safety shoes).

Simulated equipment

Virgin/recovery/transfer cylinders, electronic scale, analog & digital manifolds, vacuum gauge, vacuum pump, brass tees, recovery unit, PPE (gloves, goggles, safety shoes).

New fluid bottle, transfer bottle, recovery bottle, electronic scale, needle pressure gauge, electronic pressure gauge, vacuum gauge, vacuum pump, brass tee, recovery station, PPE (gloves, glasses, shoes).